*Note: Embossing metal is not necessary but it helps you create a custom-shaped base that looks finished for your ring embellishments. You can use anything you have on hand as a base if you can’t find these soft metal sheets: a flat button, a pre-made bezel, or even a flattened piece of hardened clay.
1. Form the eye part of the ring by making a ball with the white clay. Press onto a surface to flatten. Pinch both sides, smoothing as you go, rounding in the center.
2. Bake according to manufacturer’s directions in the oven, sealed in a little foil package to prevent fumes escaping.
3. Allow to cool. Use the paintbrush to paint an aqua circle in the center of the white clay, on the rounded part.
4. Paint a smaller black circle inside the aqua circle for the pupil.
5. Once the paint is dry, use DazzleTac to glue the clay eye onto a piece of embossing metal.
6. Cut the chain to a size that can wrap around the eye. Spread a small amount of glue around the edges of the eye and press the rhinestone chain into it.
7. Trim the embossing metal with scissors close to the rhinestone chain. Fold up around the chain to create your very own custom bezel.
8. Spread Mod Podge Dimensional Magic (or another high-gloss acrylic sealant) on the rounded surface of the eye to create a glossy covering. Use a toothpick to pop any air bubbles, and leave to dry at least 24 hours.
9. Glue the eye piece onto the ring base, and let dry before wearing.
Happy DIY’ing – and be ultimately protected from any external negativity or evil!